Tests for sperm concentration in semen

In just five minutes, this Male Fertility Test Kit will allow you to see whether or not the concentration of sperm in your sample is within what is perceived to be a normal range or not.

One of the most critical factors when trying to conceive is sperm concentration in semen. A low sperm count will make conception difficult, if not impossible.

For this reason, sperm concentration is closely monitored by doctors when couples are finding it hard to conceive.

Male infertility is common, affecting around 7% of men. A low sperm count is not always the issue, however, as it is possible to have a sperm count within the normal range but in which the sperm are weak, inactive or deformed in some way.

Instructions

Before you test, it is imperative that you abstain from any kind of sexual activity for 3-7 days. This will help to ensure that the volume and quality of the sperm in your sample is at its peak and that your result will be an accurate depiction of your sperm concentration.

The semen sample should be extracted during masturbation directly into the test cup. Take care not to contaminate the sample in any way, including by touch or tissue.

Before opening the test cassette, leave the semen sample to stand at room temperature for one hour at room temperature. Do not, however, wait longer than 12 hours before testing the sample.

1. Remove the test cassette from the foil pouch and lay it carefully on a flat surface.
2. Input your semen sample into the cup provided.
3. Leave the sample to stand for 60 minutes. This will ensure that your semen is properly liquefied.
4. Take the semen transfer device (provided) and fill up to the 0.1ml level indicated on the device with the semen sample. Now add the sample to the vial of sample dilution buffer.
5. Mix the semen sample with the test solution (dilution buffer), securing the lid and turning the vial upside down 5-10 times.
6. Hold the vial upright and open the cap. Transfer 2 full drops to the specimen well of the test cassette, then set a timer for 5 minutes.
7. Wait 5 minutes after dispensing the specimen to read the results. Do not read the results after 10 minutes.

Inside the box you will find:

• 1 x semen collection cup
• 1 x semen transfer device
• 1 x plastic vial containing dilution buffer liquid
• 1 x test cassette
• 1 x set of instructions